A-A-1439 Disinfectant-Detergent, General Purpose Phenolic TypeThis commercial item description CID covers phenolic type disinfectant-detergent. The disinfectant-detergent described herein is intended for use as a general purpose cleaner and disinfectant for hard surfaces such as walls, floors, woodwork and metal furniture in hospitals and public buildings.

Pages 1 - 2 - 3 - 4

A-A-1439B

Viricidal against Andenovirus Type A-2 or Type 5

Herpes simplex I or II Vaccina

Influenza A2, A3 or AMichigan

Effectiveness shall be documented by data from test methods and conditions acceptable under

Environmental Protection Agency (EPA) DIS/TSS 1-10.

2.2 Cleaning efficiency. The use-dilution solution, prepared with hard water containing a minimum of 400 ppm hardness (as calcium carbonate) and 5% (v/v) BSA, shall have a cleaning efficiency comparison index (cleaning efficiency of the use-dilution divided by the cleaning efficiency of a 0.25 percent by weight solution of the standard detergent) of not less than 0.7,

when tested as specified in FED-STD-536, Test Method 6701, Cleaning Efficiency.

2.3 Effect on conductive flooring. When conductive flooring conforming to the requirements of National Fire Protection Association (NFPA) 99 is washed with the use-dilution solution, prepared with hard water containing a minimum of 400 ppm hardness (as calcium carbonate) and

5% (v/v) BSA, and allowed to dry without rinsing, it shall still meet the conductivity requirements of NFPA 99.

3. REGULATORY REQUIREMENTS. The phenolic type disinfectant-detergent shall be registered and labeled in compliance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended in accordance with the Code of Federal Regulation (CFR),

40 CFR Parts 162-280. This act, and regulations promulgated thereunder, is administered by the Environmental Protection Agency (EPA). The containers shall be labeled, with contents and directions for use, in accordance with 40 CFR 156-157.

4. QUALITY ASSURANCE PROVISIONS.

4.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial

market. The Government reserves the right to require proof of such conformance.

4.2 Market acceptability. The item offered must have been sold to the Government or commercial market.

4.3 EPA registration. The offeror shall have a current EPA registration for the product.

5. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or

order.