MIL-DTL-44410C
3.1.2 Treatment bags. The treatment bags shall be flat style made from sheets or rolls
and shall be clean and free of extraneous matter. Each bag shall be 0.1 mm (4 mil) polyethylene,
of a color conforming to FED-STD-595/34094, 29.2 cm (11.5 inches) in length by 36.2 cm
(14.25 inches) in width, with two heat-sealed side seams. Each bag shall provide a zip lock
closure along the 36.2 cm side with no overhang lip, and not less than 2.5 cm (1 inch) or more
than 3.2 cm (1.25 inches) from the top of the bag. The interlocking seal shall be made by
applying pressure with the fingers to the seal area. Each impregnation bag (bag A - coat, and bag
B - trousers) shall include the following labels:
a. The information and warning label shown in figure 2 on the side opposite the zip lock.
lock side, and parallel with the zip lock.
c. The labels shall be black.
3.1.3 Pouch for two bottles. Two bottles shall be placed inside a 0.05 mm (2 mil)
polyethylene pouch, of a color conforming to FED-STD-595/34094, heat-sealed, with an easy-
open notch. One side of the pouch shall include the label information shown in figure 5, in
black.
3.1.4 Permethrin bottle. The bottle, with a capacity of 10 milliliters (mL), shall be
injection molded of a clear, unbreakable material that shall not be adversely affected by the
contents. The plastic bottle shall be amber, brown, green, or natural in color and the material
from which the bottle is fabricated shall include an ultraviolet light blocker. The oval shaped,
flat bottomed bottle shall have a flat, standard, threaded cap with liner that is able to contain the
contents without leakage. Threads on the bottle shall have clear, sharp, molded edges,
functionally equivalent to machine-cut threads that will retain the cap securely on the bottle. The
cap and cap liner shall neither affect, nor be affected by, the intended contents. The cap shall be
a 10 mL metal foil-lined urea screw cap with a black, gloss finish. Each bottle shall be filled
with 9 mL of permethrin (see 3.1.5) and shall be able to withstand temperatures from 57 ºC
(-70 ºF) to 71 ºC (160 ºF) for 90 days without change in liquid content of more than ±5.0 percent.
The cap shall be furnished with a plastic seal to prevent inadvertent opening or loosening. Each
bottle shall have a printed or silk-screened label as shown in figure 6, in black.
3.1.5 Insect repellent. The insect repellent shall conform to MIL-DTL-44411. The
insect repellent shall be furnished in bottles as specified in 3.1.4.
3.1.6 String. Two pieces of 8-ply string, 60 cm (24 inches) long, and of a color
conforming to FED-STD-595/34094, shall be included to be used as ties for the garments.
3.1.7 Marking pen. The marking pen (see 5.1.1) is used to mark the garments after
treatment. The marking pen ink shall be black and withstand both dry cleaning and laundering.
The pen shall have sufficient ink to mark 12 sets (coat and trousers) of military service field
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business